
****************************************************************************
*                                                                          *
*                         The Ethernet Adapter                             *
*                                                                          *
*                 LANtastic AI-LANBIOX Compatible Driver                   *
*                                                                          *
*                               Ver. 3.05                                  *
*                                                                          *
*                              README file                                 **                                                                          *
****************************************************************************

1. Introduction:

   The Ethernet Adapter LANtastic AI-LANBIOS Compatible Driver supports
   802.3 and XEROX frame type for E1000 and E2000 series cards.  Ensure
   that you have an Adapter Independent version of the LANtastic product
   and the LANtastic NOS/AI, since AE-2 LANtastic v3.02 or later can no
   longer work with non-Artisoft hardware.


2. Contents of the Subdirectory:

      E2K.EXE         The LANtastic AI-LANBIOS compatible driver that
                      works with LANtastic v4.1 and AILANBIOS v3.01.


3. Installation

   1) Install the Ethernet Adapter on your system, following the procedure
      described in your Ethernet adapter user's manual.

   2) Install the LANtastic product following the directions in your LAN-
      tastic Network Operating System User Manual.  Then choose the type of
      your LAN adapter and driver; for instance, NE2000.

   3) After installation, edit STARTNET.BAT by replacing the line "NEX000..."
      with "E2K VERBOSE".  The result should look like this:
                .
                .
                ( SHARE /L:200 )

                E2K VERBOSE
                AILANBIOS
                REDIR PCNAME LOGINS=3

                ( SERVER )
                NET LOGIN \\SERVER USER
                .
                .

    4) Copy E2K.EXE from the Distribution Diskette to your \LANTASTI sub-
       directory.

    5) Run STARTNET.BAT to start the LANtastic NOS.


4. Unload

   To unload this driver, firstly remove the AILANBIOS, then remove the
   driver, as shown below:
                 .
                 .
                 AILANBIOS REMOVE
                 E2K REMOVE

